Description
Specification
- Filling nipple (FN), M 10 x 1 male (12 670)
- Angled spout, M 10 x 1, 150 mm (12 635)
- Precision machined coupler, 4 claws, M 10 x 1 female (12 643)
Special notes
- Operates with greases up to NLGI grade 2 at 20°C
- Designed for use in rough conditions, wall thickness grease gun tube: 1 mm
- Plunger with exactly fitting when using bulk grease or cartridge
- Due to the flexibility of the push rod, the plunger can be inserted into damaged cartridges or cartridges not exactly matching the standard dimensions
- acc. to DIN 1283
- TÜV - certified
- Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication)
- No dummy (apparent) lubrication. Sealing system: O-ring and ball valve prevent grease compressed in the grease gun head from feeding back.
- Performance unchanged after 40.000 actuating cycles
- Separate filling and ventilation valves on grease gun head
- Grease gun head, zinc die casting Z 410
- Sure grip handling due to deep band knurls
- Slip resistant handle on grease gun lever
- The ergonomic handle of the plunger rod assists in overcoming the spring load
- Enables even under extreme backpressure, a variable lubrication pressure with steady effort applied
- Allows lubrication in difficult to reach locations because the smallest lever operation results in grease being pumped reliably to the lubrication point.
- Plunger rod clamp on end cap enables manual pressure to be applied to spring to compress bulk grease, or to force in the plunger in damaged cartridges.
- Push rod can be locked in any position - push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify)
- High-speed ventilation, by half a rotation of the grease gun tube
|
Technical data |
|
|
Grease gun
connection, pressure-side through a steel adaptor |
M 10 x 1 |
|
Filling nipple |
M 10 x 1 |
|
Capacity (cm³) |
500 |
|
Refilling options |
400 g grease
cartridge, DIN 1284, grease filling system or loose grease using a spatula |
|
Diameter of grease
piston (mm) |
9 |
|
Grease pump piston actuation |
manually lever operated |
|
Delivery rate/stroke (cm³) |
proportional to the
manual lever operating distance, max. 1,6 |
|
Discharge pressure
up to (bar) |
400 |
|
Burst pressure system (bar) |
850 |
|
Burst pressure
grease gun head (bar) |
1200 |
|
Operation of push rod |
with T-grip |
|
Cover |
loose |
|
Wall thickness of
grease gun tube (mm) |
1 |
|
Lacquering |
graphite-grey |
|
Dimensions LxWxH (mm) |
380 x 130 x 66 |
|
Weight (kg) |
1,48 |
Specificaties
General data
| Weight (kg) | 1..5 |
|---|
Technical data
| Connection | M10x1 |
|---|---|
| Burst pressure (bar) | 850 |
| Pressure (bar) | 400 |
| Transport volume/stroke (cm³) | proportioneel t.o.v. de handhefboomafstand, max. 1,6 |
| Refilling options | 400g grease cartridge, DIN 1284, grease filler or bulk grease with use of spatula |
| Capacity (cm³) | 500 |
Related downloads
- Download PDF Download
Smeertechniek USP's
- In stock? Ordered before 15:00 (CEST) is shipped within 24 hours.
-
Questions? Urgent request? Or are you looking for something you cannot find on the website? Please do not hesitate to contact us!
010 466 62 55 - Our sales department is open Monday to Thursday from 8:30 to 17:00 (CEST) and Friday from 8:30 to 15:00 (CEST).